GB
Connecting an external audio device to the car radio
Cleaning
Safety instructions
Cleaning
Troubleshooting
Safety instructions
32
Press the SCN/REC button several times to select either the copy option
COPY USB (copy to a USB data carrier) or COPY MMC (copy to an SD/
MMC memory card).
Start the copy process by pressing the BND/ENT button.
During the copy process COPY appears in the display and a percentage indicator
from 01 - 100 shows the copying progress. After the notice COPY 100 the copying
process is ended and playback of the MP3 title continues.
Connect the audio output of an external audio device (i.e. an MP3 player)
via a 3.5 mm stereo jackplug to the socket AUX IN on the front panel of
the device.
Select playback of the audio input by pressing, several times, the MD/LD
button until AUX is shown in the display.
IMPORTANT
Possible damage to the device
►
Make sure when you are cleaning the device that no moisture gets inside in
order to avoid irreparable damage to it.
■
Clean the housing exclusively with a soft damp cloth and a mild dishwashing
liquid.
In this chapter you will receive important information for malfunction localization
and remedies. Observe the instructions in order to avoid danger and damage.
WARNING
Observe the following safety information to avoid danger and property
damage:
►
Repairs to electronic devices may only be carried out by specialists who
have been trained by the manufacturer. Considerable danger to the consu-
mer and damage to the device can occur as a result of incorrect repairs.
Cleaning
MP3/CD Car Radio KH 2382