Atari 400 User Manual page 211

until the tape reaches its end. (This eases the
tension on all sections of the tape so that it will
work reliably) When the tape reaches the end,
press the STOP button; then press REWIND until
the tape reaches its beginning.
STEP 3
If you didn 't perform the step in the previous
note, press REWIND on the recorder to be sure
that the tape is rewound to its beginning.
STEP 4
Press PLAY on the recorder.
STEPS
While holding down the START button on your
computer, turn on the computer.
STEP 6
When you hear a beep sound from the computer,
press the RETURN key The program automati-
cally loads into the computer's memory
When the program has finished loading, the first
screen of your program appears. You can then
refer to your software documentation to see
how to use your program.
If the first screen of your program does not
appear, most likely an error in loading has
occurred, and the computer enters Memo Pad
Mode. Rewind the cassette and try this pro-
cedure again.
209