Atari 400 User Manual page 200

47 "STATUS
=
";S: CLOSE #1: STOP
5 DATA 162,16,104,104,157,69,3,104,157,68,3,
169,7,157,66,3,169,0,157,72,3,169,16,157,73,
3,32,86,228,96
STEP 2
When you have finished typing the program, in-
sert the cassette that you want to copy into
your cassette recorder. Be sure that the cassette
is rewound to the beginning of the tape.
NOTE: If this is the first time you are using the
cassette, press FAST FORWARD on the recorder
until the tape reaches its end. (This eases the
tension on all sections of the tape so that it will
work reliably.) When the tape reaches the end,
press the STOP button; then press REWIND until
the tape is rewound
to
the beginning.
STEP 3
To begin using the tape, push the PLAY button
on your recorder.
STEP 4
Now, type the word RUN on your keyboard,
and press the RETURN key. You will hear a single
beep from the computer console.
STEPS
When the message READING ... appears on the
screen, press the RETURN key again. The com-
puter is now reading the contents of the pro-
198