Atari 400 User Manual page 209

until the tape reaches its
end. (This eases the
tension on all sections of the tape so that it will
work reliably) When the tape reaches the end,
press the STOP button; then press REWIND until
the tape is rewound to its beginning.
STEP 4
If you didn't perform the step in the previous
note, press REWIND on the recorder to be sure
that the tape is rewound to its beginning.
STEPS
Press PLAY on the recorder.
STEP 6
To load the program into the computer's mem-
ory, type the word CLOAD on the keyboard,
then press the RETURN key You will hear the
computer make a single
be~p
sound.
STEP 7
Once the computer beeps, press the RETURN
key again. You will hear a high-pitched whistle,
then a series of beeps. This means that the pro-
gram is being loaded into memory
STEPS
When the program is loaded, the word READY
appears beneath the first READY message on
the screen. At this point, type the word RUN
and press the RETURN key You are now ready
to use the program that you loaded! Refer to
your software documentation to learn how to
use your program.
207