Removing The Evaporator Fan Motor, The Bimetal, The Defrost Heater, & The Evaporator - KitchenAid KSBP25FKSS00 Technical Education

REMOVING THE EVAPORATOR FAN MOTOR,
THE BIMETAL, THE DEFROST HEATER,
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
2. Open the freezer door and remove the ice
bin, shelves, and freezer baskets.
Ice Bin
Shelves &
Freezer Baskets
& THE EVAPORATOR
3.
4.
5.
Continued on the next page.
4-11
Remove the light shield and bulb from the
freezer light.
Remove the phillips screw from each of
the two top rear shelf support studs and
remove the studs.
Remove the eight hex-head screws from
the evaporator cover.
Light Shield & Bulb
Remove Rear
Shelf Studs
Evaporator
Cover Screws
(2 of 8)