Removing The Bimetal, Defrost Heater, And Evaporator - KitchenAid KBFC42FS Technical Education

REMOVING THE BIMETAL, DEFROST
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the freezer drawer (see page
4-20 for the procedure).
3. Remove the ice bin and storage drawer
from the freezer.
Ice Bin
Center Divider
HEATER, AND EVAPORATOR
Storage Drawer
4. Remove the two front left and right side
hex-head screws from the center divider.
5. Loosen the two rear hex-head slotted
screws, then pull the divider forward and
remove the keyhole slots from the screws.
Remove the divider from the liner.
6. Disconnect the receiver board wire con-
nector.
4-27
Front Screw
Hex-Head
Slotted Screw
Center Divider
(Right Side View)
Receiver Board
Wire Connector
Center Divider
Continued on the next page.