6.
Disconnect the two wires from the light
socket and the 3-wire connector from the
touch/display board, and remove the touch
control assembly.
3-Wire
Connector
7.
To remove the touch/display board,
unclip it from the touch control housing
and remove the board.
Clip
(1 of 5)
Light
Socket
Wires
Touch/Display Board
Touch Control
Housing
8.
To remove the insert and overlay, press
the locking clips, and push the insert and
overlay out of the touch control housing
opening.
Unclip & Push Out
9.
To remove the motorized air door:
a) Pull the cover and motorized air door
away from the refrigerator liner.
b) Disconnect the wire connector from the
motorized air door.
4-3
Insert & Overlay
Motorized Air Door Cover
Motorized Air Door
Wire Connector