Table of Contents
Advertisement
Overview of the Setup Menu Screens
The Setup program initially displays the Main menu screen. In each screen
there are options for modifying the system configuration. Select a menu
screen by pressing the left <←> or right <→> arrow keys. Use the up <↑> or
down <↓> arrow keys to select items in a screen. Use the <Enter> key to
select an item for modification. For certain items, pressing <Enter> will
bring up a subscreen. After you have selected an item, use the arrow keys to
modify the setting.
Setup Menu Screen
Main
Advanced
Security
Exit
Setup Subscreen
Floppy Options
IDE Configuration
Boot Options
Peripheral Configuration
Advanced Chipset Configuration
Power Management Configuration
Plug and Play Configuration
3-2
Description
For setting up and modifying some of the basic
options of a PC, such as time, date, diskette drives,
hard drives.
For modifying the more advanced features of a PC,
such as peripheral configuration and advanced
chipset configuration.
For specifying passwords that can be used to limit
access to the system.
For saving or discarding changes.
Description
For configuring your diskette drives.
For configuring your hard drives.
For modifying options that affect the system boot
up, such as the boot sequence.
For modifying options that affect the serial ports, the
parallel port, and the disk drive interfaces.
For modifying options that affect memory and
system busses.
For accessing and modifying Advanced Power
Management (APM) options.
For modifying options that affect the system's Plug
and Play capabilities.
Using the Setup Program
Advertisement
Table of Contents
