Installing Software Drivers
This appendix tells you how to install:
•
Power management software
•
Plug and Play software
Each of these are contained on a separate diskette. Each diskette contains a
SETUP.EXE program that installs the software or drivers. The files on the
diskettes are compressed to conserve space. The files can not be copied
directly to the hard disk; you must use the Setup Program located on each
installation diskette.
Certain models are not supplied with this software.
Installing Plug and Play Software
The Plug and Play software must be installed from Windows.
1. Close any open applications so that only Windows is running.
2. Insert the Plug and Play diskette into the diskette drive.
3. From the Program Manager File menu, select Run.
4. In the Command Line dialog box, type
5. Follow the instructions in the Setup utility.
Refer to the README.TXT file on the diskette for more information about
the Plug and Play software.
System Product Guide
B
and press <Enter>.
A:\SETUP
B-1