The first part of this chapter helps you identify and solve problems that
might occur when the system is in use. The second part lists error code
messages that might display.
Resetting the System
There are two ways to reset the system:
•
Press <Ctrl + Alt + Del>
•
Cycle the system power. To do this:
1. Press in and release the front panel power control button.
2. Wait at least 20 seconds.
3. Press in and release the front panel power control button. The
system will power up and immediately begin the power-on self test
(POST).
Resetting the system will:
•
Clear the system memory
•
Restart the power-on self test (POST)
•
Reinitialize all peripherals
•
Load the operating system
System Product Guide
Solving Problems
6
6-1