Lcd Control Panel; Function Of Control Panel; On / Off Button; Selector Button For Display Panel - Raleigh ebike User Manual

4 LCD control panel

2
1
15
14
13
Rear
4.1

Function of control panel

4.1.1 On / Off button

Press the "On / Off" button to switch on the control panel
and drive.
The assist level that was active at the time the control
panel was switched off is automatically reinstated. The
back-lit display is turned on briefly then goes out. All
recording of data (trip, actual journey length, average
speed, top speed, total journey length) starts as soon
as you switch the control panel on and stops when you
switch it off.
10 II User Manual Fast Pedelec
6
5
3 4
11
12
delete all data
1 On / Off
2 Light switch
3 Charge state indicator
4 Indicator for headlight
5 Power output indicator
(only visible when the bike is in motion)
7
6 Speed
8
7 Display of actual journey length
9
8 Average speed
9 Top speed
10
10 Total journey length
11 Display panel
12 Assist level
13 Selector button for display panel ("Mode")
14 Reduce assist level
15 Increase assist level
Display switched off

4.1.2 Selector button for display panel

You can display the information "Trip", "Average speed",
"Top speed" and "Total journey length" consecutively
by pressing the selector button for the display panel
("Mode").
The setting that was selected when you switched off is
also displayed first in this case.
Display switched on