Lcd Control Panel With Display - Raleigh ebike User Manual

5.2

LCD control panel with display

LCD control panel
2
4
1 Power
2 More powerful assistance
3 Less powerful assistance
4 Set
5 Pushing assistance
1
The "Power" button is located on the right-
•
hand side. Press once to switch the system on and
press a second time to switch it off.
2 3
The arrow buttons used to control the
•
level of assistance are located on the left-hand side
of the control panel.
4
The "Set" button is located between the arrow
•
buttons. Using this button, different displays can
be called up. Program the system with your desired
data.
5
If the model features pushing assistance, the
•
switch for this will be on the underside of the
control panel.
18 V User Manual Impulse Pedelec
LCD display
1
3
5
1
2
3
4
5
The LCD display in the middle of the handlebar is divided
into five different display panels.
3
2
1
Speed
Power-assist mode
Battery charge state
Remaining distance display
Information area
1
At the top on the left is your current speed.
•
2
Next to current speed on the right is a display
•
showing the selected power-assist mode.
3
At the top on the right is the battery symbol
•
which tells you the current charge state of your
Pedelec's battery.
4
Below this, you can see the remaining distance
•
over which you will still receive assistance from
the current battery charge.
5
Along the bottom section of the display is a
•
long information area that can be used to display
the following information:
• How much of its potential output the motor is
currently delivering.
• The costs that have been incurred in the course
of the current trip and during the Pedelec's
entire service life.
• The savings achieved in both euros and CO
comparison with the same journey by car.
• The total number of kilometres covered by this
system.
• Display of kilometres covered during the day
and overall.
4
5
in
2