Priority Scanning ( P-Scan ); Priority Channel Setting - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

8.6.4 Priority Scanning ( P-SCAN )

In the default setting, Channel 16 is set as the priority channel. You may
change the priority channel to another channel from Channel 16 in the Radio
Setup Mode, refer to section "10.2.5 Priority Channel".
1. Adjust the SQL knob until background noise
disappears.
2. To start priority scanning, press one of the soft
keys, then press the
be necessary to press the
locate the
on the LCD. Scanning will proceed between
the memorized channels and the priority
channel. The priority channel will be scanned
after each programmed channel.
3. To stop scanning, press the
one of the soft keys, then press the
soft key.

8.6.5 Priority Channel Setting

1. Press and hold the
MENU " appears.
2. Select " CH FUNC SETUP " with the
keys, then press the
3. Select " PRIORITY CH " with the
keys, then press the
4. Press the
channel.
5. Press the
setting.
6. Press the
twice to exit the menu and return to radio
operation mode.
Page 28
soft key). " P-SCAN " appears
key until " S E T U P
soft key.
soft key.
/ keys to select the Priority
soft key to store the selected
key or press the
soft key (it may
soft key to
key or press
/
/
soft key
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
DSC SETUP
-CH FUNC SETUP-
SCAN TYPE
SCAN RESUME
PRIORITY CH
-PRIORITY CH-
16
15
14
GX1200E