Removing The User Interface, The Interlock Switch, Latch Assembly, And Wax Motor - KitchenAid briva KIDS01EK Technical Education

REMOVING THE USER INTERFACE, THE INTERLOCK
SWITCH, LATCH ASSEMBLY, AND WAX MOTOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dishwasher or disconnect power.
2. To remove the user interface and the
touch panel:
a) From under the sink, remove the two
ribbon cable cover nuts from the studs.
Ribbon Cable Cover
Ribbon Cable Cover Nuts
Front Panel
b) Remove the five screws from the front
panel and remove the panel.
Front Panel
c) Slide the ribbon cable cover down so
the channel cover is free of the locking
tabs and remove the cover.
Tab
4-8
Screw (1 of 5)
Ribbon Cable Cover
Channel Cover