Water And Drain Requirements - KitchenAid briva KIDS01EK Technical Education

DISHWASHER
• A hot water line with 20-120 psi water pres-
sure.
• 120°F water at dishwasher.
• 3/8" O.D. copper tubing with compression
fittings, or flexible stainless steel braided fill
line (1/2" minimum plastic tubing is optional
but not recommended).
• A 90° elbow with 3/8" N.P.T. external pipe
threads on one end.
Important: Do not solder within 6" from the
water inlet valve.
SINK FAUCET
• A hot and cold water line.
• Copper tubing with compression fittings for
the specific faucet to be installed.

Water And Drain Requirements

DRAINS
Separate drain traps for the sink and dish-
washer must be provided.
If the dishwasher drain exits through the back
wall, the center line of the drain MUST be a
minimum of 1/2" below the dishwasher drain.
This is required to completely drain the dish-
washer tub so that no standing water remains
in tub.
22-1/32"
To Bottom Of
Dishwasher
Drain
1/2"
Minimum
2-5
Back
Wall