Table of Contents
Advertisement
f) Disconnect the wire connectors from
the interlock switch and the wax motor.
g) Remove the plastic retaining nut from
the button holder, and remove the but-
ton, spring, and latch assembly from
the dishwasher. NOTE: There is spring
tension against the retaining nut, so
use caution, since the spring will be
released when the nut is removed.
Interlock Switch
Plastic Retaining Nut
Wax Motor
Wire
Connectors
h) Press in on the locking tab, and slide
the wax motor and its linkage out of the
latch assembly.
Linkage
Button Holder
Spring
4-10
Locking Tab
Latch Assembly
Button
Advertisement
Table of Contents
Troubleshooting
