Cycle Status Indicators - KitchenAid briva KIDS01EK Technical Education

Control
Lock
Sanitized
Check
Drain

Cycle Status indicators

Control Lock
When Control Lock is lit, all buttons are dis-
abled.
Sanitized
If you select the SANI RINSE option, Sani-
tized glows when the Sani Rinse cycle is fin-
ished. If your dishwasher did not properly sani-
tize your dishes, the light flashes at the end of
the cycle. This can happen if the cycle is
interrupted or the incoming water temperature
is too low. The light goes off when you open
and close the lid.
CYCLE STATUS INDICATORS
Add
Rinse
Aid
Check Drain
If the dishwasher senses the drain stopper is
not closed properly, the cycle immediately ends,
the lid pops open, and the Check Drain indica-
tor is lit.
Add Rinse Aid
Fill the Rinse Aid dispenser when the Add
Rinse Aid indicator is lit. A rinse aid prevents
water from forming droplets that can dry as
spots or streaks. Rinse Aid is essential for
efficient drying.
If the Rinse Aid dispenser is empty, the light
glows when you select a cycle, or while a cycle
is running.
3-6