KitchenAid briva KIDS01EK Technical Education page 60

e) To remove an upper guide, (see the
photo in step 5 on page 4-23 for the
guide location), pry out on the locking
tab with a screwdriver, and pull the
guide out of the holder.
Pry Tab Out
Pull Upper Guide Out
REASSEMBLY NOTE: After servicing the dish-
washer lid, open and close the lid to make sure
that it operates normally.
The door should just "pop open" when the latch
is released. If it opens further, reduce the
spring tension by moving the end of the spring
in the spring tension bracket notches (see the
photo below).
With the lid open all the way, it should stay
open. If it begins to close, increase the spring
tension.
Spring Tension Bracket
4-24