Table of Contents
Advertisement
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dishwasher or disconnect power.
2.
Remove the two panels from the bottom of
the dishwasher (see step 2 on page 4-14).
3.
Raise the dishwasher lid and prop it up to
keep it from falling during the removal
procedure. This will relieve some of the
spring tension from the linkage.
Prop Lid Up
REMOVING THE DISHWASHER LID
AND THE LINKAGE COMPONENTS
4.
To remove the dishwasher lid:
a) Mark the notch locations on the tension
brackets for each lid tension spring,
and then unclip the ends of the springs.
Left Lid Tension Spring
Tension
Right Lid Tension Spring
Bracket
4-22
Tension
Bracket
Advertisement
Table of Contents
Troubleshooting
