Option Selections - KitchenAid briva KIDS01EK Technical Education

You can customize your cycles by pressing the
SANI RINSE option. If you change your mind,
press the option again to turn the option off.
You can change an option anytime before the
selected option begins.
Press the Start pad to repeat the same cycle
and option as the previous wash cycle.
NOTE: If the last cycle you completed was a
rinse cycle, when you press the Start pad, the
dishwasher runs the last full wash cycle and
option.
SANI RINSE Option
Select this option to raise the water tempera-
ture in the final rinse to approximately 160°F
(71°C). Sani Rinse adds heat and time to the
cycle.
NOTE: Sani Rinse is an option with the Pots/
Pans and Normal cycles.
Control Lock
Use Control Lock to prevent unintended use of
the dishwasher. You can also use the Control
Lock feature to prevent unintended cycle, or
option changes during a cycle.
Control
Lock

OPTION SELECTIONS

Sani
Rinse
When Control Lock is lit, all buttons are dis-
abled.
NOTES:
• The dishwasher lid can be opened while the
controls are locked.
• You can turn on the Lock while the dish-
washer is running.
To turn on the Lock:
Press and hold the SANI RINSE option key
for 4 seconds. The Control Lock glows.
If you press any pad while your dishwasher
control is locked, the light flashes 3 times.
To turn off the Lock:
Press and hold SANI RINSE™ option key for 4
seconds. The light turns off.
IMPORTANT:
• Operate the dishwasher only when you are
at home.
• If your home is equipped with a water soft-
ener, do not start the dishwasher during the
regeneration of the softener.
3-5
Sani
Rinse