Ipi Electronic System Wiring Diagram - Empire Comfort Systems DVP42 Series Installation Instructions And Owner's Manual

IPI ELECTRONIC SYSTEM WIRING DIAGRAM

If any of the original wire as supplied with this unit must be
replaced, it must be replaced with equivalent gauge and tem-
perature rated wire.
This appliance is only for use with the type of gas indicated
on the rating plate and may be installed in an aftermarket,
permanently located, manufactured (mobile) home where not
prohibited by local codes. This appliance is not convertible for
use with other gases, unless a certified kit is used.
CAUTION: Do not operate the appliance with liner(s)
removed, cracked or broken. Replacement of the liner(s)
should be done by a licensed or qualified service person.
WARNING: Improper installation, adjustment, alteration,
service or maintenance can cause property damage, personal
injury or loss of life. Installation and service must be performed
by a qualified installer, service agency or the gas supplier.
Page 50 31455-4-1113