Ipi System Electronic System Wiring Diagram - Empire Comfort Systems DVCT30CBN95N-2 Installation Instructions Manual

Fireplace heater
Table of Contents

Advertisement

IPI ELECTRONIC SYSTEM WIRING DIAGRAM
APS
SOLENOID
VALVE
SYNC
BUTTON
If any of the original wire as supplied with this unit must be
replaced, it must be replaced with equivalent gauge and
temperature rated wire.
This appliance is only for use with the type of gas indicated on the
rating plate and may be installed in an aftermarket, permanently
located, manufactured (mobile) home where not prohibited by
local codes. This appliance is not convertible for use with other
gases, unless a certified kit is used.
Do not operate the appliance with liner panel(s) removed,
or damaged. Replacement of the liner panel(s) should be
done by a licensed or qualified service person.
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, personal injury
or loss of life. Installation and service must be performed
by a qualified installer, service agency or the gas supplier.
Page 22
BLUE
PINK
BLUE
BLACK
BLACK
CAUTION
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS
This appliance is equipped with a three-prong (grounding)
plug to protect against shock hazard. It must be plugged
directly into a properly grounded three-prong receptacle.
Do not remove the grounding prong.
Label all wires prior to disconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation.
WARNING
CAUTION
41921-0-0420

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvct30cbn95p-2Dvct35cbn95n-2Dvct35cbn95p-2Dvct30Dvct35

Table of Contents