Wincor Nixdorf Beetle™ Terminal Default Settings; Wincor Nixdorf Rs232 Mode A; Keyboard Country Layout - Honeywell Voyager 1200g User Manual

Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. The following prefixes are
programmed for each symbology:
Note: If you are having unexpected results with this programming code, scan the
page 1-6 first, then scan the programming code above.

Wincor Nixdorf RS232 Mode A

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal. The following pre-
fixes are programmed for each symbology:

Keyboard Country Layout

Scan the appropriate country code below to program the keyboard layout for your country or language. As a general rule, the
following characters are supported, but need special care for countries other than the United States:
@ | $ # { } [ ] = / ' \ < > ~
Keyboard Countries
* United States
Symbology Prefix
Code 128 K
Code 93 L
Codabar N
UPC-A A0
UPC-E C
EAN-8 B
Wincor Nixdorf Beetle Settings
Symbology Prefix
Code 128 K
Code 93 L
Codabar N
UPC-A A0
UPC-E C
EAN-8 B
All other bar codes M
Wincor Nixdorf RS232 Mode A
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
All other bar codes
Resetting the Custom Defaults
Symbology
EAN-13
GS1-128
Interleaved 2 of 5
Plessey
Straight 2 of 5 IATA
GS1 DataBar
Settings
Prefix
A
P
I
O
H
M
Prefix
A
K
I
O
H
E
bar code on
2 - 9