Cts/Rts Emulation; Ack/Nak Mode; Communication Timeout - Honeywell Voyager 1200g User Manual
Single-line laser bar code scanner
Hide thumbs
Also See for Voyager 1200g:
- User manual (288 pages) ,
- Quick start manual (13 pages) ,
- User manual (238 pages)
Table of Contents
Advertisement
Scanning either of these codes also adds a CR and LF.
USB Serial Emulation for
Windows XP, Windows Server
2003, and later
USB Serial Emulation for Windows 2000
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
CTS/RTS Emulation On
* CTS/RTS Emulation Off
ACK/NAK Mode
ACK/NAK Mode On
* ACK/NAK Mode Off
Communication Timeout
This allows you to set the length (in milliseconds) for a timeout for the host ACK/NAK response. Scan the bar code below,
then set the timeout (from 0-65535 milliseconds) by scanning digits from the
Programming
Chart, then scanning Save.
Default = 2000 ms.
Communication Timeout
2 - 5
Advertisement
Table of Contents
Troubleshooting
