Gs1 Emulation; Postal Codes - Honeywell Voyager 1200g User Manual
Single-line laser bar code scanner
Hide thumbs
Also See for Voyager 1200g:
- User manual (288 pages) ,
- Quick start manual (13 pages) ,
- User manual (238 pages)
Table of Contents
Advertisement
* Off
GS1 Emulation
The scanner can automatically format the output from any GS1 data carrier to emulate what would be encoded in an equivalent
GS1-128 or GS1 DataBar symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8, ITF-14, GS1-128, and
GS1-128 DataBar and GS1 Composites. (Any application that accepts GS1 data can be simplified since it only needs to recog-
nize one data carrier type.)
If GS1-128 Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are expanded out to 16 digits. If the AIM ID
is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
Symbology Charts
on page A-1).
If GS1 DataBar Emulation is scanned, all retail codes (U.P.C., UPC-E, EAN8, EAN13) are expanded out to 16 digits. If the AIM
ID is enabled, the value will be the GS1-DataBar AIM ID, ]em (see
Symbology Charts
on page A-1).
If GS1 Code Expansion Off is scanned, retail code expansion is disabled, and UPC-E expansion is controlled by the
UPC-E0
Expand
(page 7-30) setting. If the AIM ID is enabled, the value will be the GS1-128 AIM ID, ]C1 (see
Symbology Charts
on
page A-1).
If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are converted to EAN13 format.
Default = GS1 Emulation Off.
GS1-128 Emulation
GS1 DataBar Emulation
GS1 Code Expansion Off
EAN8 to EAN13 Conversion
* GS1 Emulation Off
Postal Codes
The following lists linear postal codes. Any combination of linear postal code selections can be active at a time.
7 - 49
Advertisement
Table of Contents
Troubleshooting
