Wincor Nixdorf Beetle™ Terminal Default Settings; Keyboard Country Layout - Honeywell Vuquest 3320g User Manual

Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. The following prefixes
are programmed for each symbology:
Note: If you are having unexpected results with this programming code, scan the Activate Defaults bar code on
first, then scan the programming code above.

Keyboard Country Layout

SIf your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default is a US keyboard. To change this layout,
refer to the chart below for your keyboard country. Scan the appropriate bar code below to change the layout.
By default, national character replacements are used for the following characters: #$@[\]^'{|}~ See
Character Replacements on page A-8 to view the character replacements for each country.
Keyboard Countries
* United States
Azeri (Cyrillic)
Belarus
2 - 6
Symbology Prefix
Aztec Code V
Codabar N
Code 93 L
Code 128 K
Data Matrix R
EAN-8 B
EAN-13 A
GS1 DataBar E
GS1-128 P
Wincor Nixdorf Beetle Settings
Symbology Prefix
Interleaved 2 of 5 I
MaxiCode T
MicroPDF417 S
PDF417 Q
QR Code U
Straight 2 of 5 IATA H
UPC-A A0
UPC-E C
All other bar codes M
page 1-4
ISO 2022/ISO 646
Albania
Azeri (Latin)