Honeywell Voyager 1200g User Manual page 154

EAN/JAN-8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-8 data. Default = Off for both 2 Digit and 5 Digit
Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN-8 Addenda Required
When Required is scanned, the scanner will only read EAN/JAN-8 bar codes that have addenda. Default = Not Required.
Required
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is not found within this time period, the
data can be either transmitted or discarded, based on the setting you are using for
length (in milliseconds) for this timeout by scanning the bar code below, then setting the timeout (from 0-65535 millisec-
onds) by scanning digits from the
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
7 - 42
Programming Chart, then scanning Save. Default = 100.
Addenda Timeout
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
EAN/JAN-8 Addenda Required. Set the