Honeywell Voyager 1200g User Manual page 144

UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
UPC-E0 Addenda Required
When Required is scanned, the scanner will only read UPC-E bar codes that have addenda. Default = Not Required.
Required
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is not found within this time period, the
data can be either transmitted or discarded, based on the setting you are using for
Set the length (in milliseconds) for this timeout by scanning the bar code below, then setting the timeout (from 0-65535 mil-
liseconds) by scanning digits from the
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
7 - 32
Programming Chart, then scanning Save. Default = 100.
Addenda Timeout
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
UPC-E0 Addenda Required (page 7-32).