Code 128 - Honeywell Voyager 1200g User Manual

Code 128

<Default All Code 128 Settings>
Code 128 On/Off
* On
Off
128 Group Separator Output
If you wish to transmit embedded FNC1 characters as group separators (1B hex) with your Code 128 bar code output, scan
the On bar code. When Off is scanned, nothing is transmitted for FNC1 characters. Default =Off.
On
* Off
Code 128 Redundancy
If you are encountering errors when reading Code 128 bar codes, you may want to adjust the redundancy count. Redun-
dancy adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors.
Note that the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan
the Code 128 Redundancy bar code below, then scan a redundancy count between 0 and 10 on the Programming Chart
inside the back cover of this manual. Then scan the Save bar code. Default = 0.
Code 128 Redundancy
7 - 17