Managing Key Assignments - Samsung DCS Manual

3.14 MANAGING KEY ASSIGNMENTS

You can view station key assignments and add extenders to some of the programmable keys for easy
one-touch operation of frequently-used features. An extender is a number that makes an otherwise
general soft key very specific. Adding the digit 4 to a PAGE key defines this key for paging zone four.
Adding 225 to a directed pick-up key defines this key as pick-up for extension 225 only. The soft key
must already be assigned by the installing technician. Adding extenders allows one- touch operation for
that feature.
Use this program to assign extenders to the following soft keys:
KEY
BOSS
DIR
DP
DS
FWD
GPIK
IG
MMPG
PAGE
PMSG
SP
SPD
PROGRAM KEYS
UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF 107
Display shows
2. Dial the station number (eg. 205) OR
press UP or DOWN to select the station
and press the RIGHT soft key to move
3. Enter the key number (e.g. 18) OR use
UP or DOWN to scroll through the keys
and use the RIGHT soft key to move the
cursor OR press the key to be
programmed
4. Dial the extender according to the list
above OR use UP or DOWN to scroll
through the keys and press the LEFT soft
key to return to step 3 OR the RIGHT soft
key to return to step 2
5. Press TRSF to store and exit
programming OR press SPEAKER to
store and advance to the next program
Page 13
EXTENDER
Boss and Secretary (1 - 4)
PERS(1), SYS(2) or STN(3)
Direct Pick-up (station or group no.)
Direct Station Select (station or group no.)
Call Forward (0 - 5)
Group Pick-Up (01 - 20)
In/Out of Group (501- 519/529)
Meet Me Page (0 - 9, *)
Page (0 - 9, *)
Programmed Message (01 - 20)
UCD Supervise (UCD group no.)
Speed Dial (00 - 09, 500 - 999)
DISPLAY
[201] KEY EXTEND
01 : CALL1
[205] KEY EXTEND
01 : CALL1
[205] KEY EXTEND
18 : DS -> DS_
[205] KEY EXTEND
18 : DS -> DS207