Programming Account Codes - Samsung DCS Manual

3.15 PROGRAMMING ACCOUNT CODES

This program allows the System Administrator to add or change account code entries. Each entry can
have a maximum of 12 digits
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0 - 9).
UP & DOWN - Used to select entry number.
RECALL & TRSF - Used to view and change only the used entries.
HOLD - Used to clear data.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF 708
Display shows
2. Dial the account code entry (eg. 005)
OR press UP or DOWN to select the
entry number and press the RIGHT soft
key to move the cursor
3. Enter the account code via the dial pad
(eg. 1234) and press the RIGHT soft key
to move the cursor back to step 2
4. Press TRSF to store and exit
programming OR press SPEAKER to
store and advance to the next program
3.16 SETTING CALL FORWARD DESTINATIONS FOR STATIONS
Allows the System Administrator to program the call forward destinations for other station users. The
program also allows call forward to be set after the destination has been entered.
The DCS system allows five types of call forwarding. FORWARD ALL, FORWARD NO ANSWER,
FORWARD BUSY, FORWARD FOLLOW ME and FORWARD EXTERNAL. There is an additional
option, FORWARD BUSY/NO ANSWER, that allows both of these options to be activated at the same
time, provided that destinations have been entered for both.
0 = FORWARD CANCEL
1 = ALL CALL
2 = BUSY
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
Page 14
3 = NO ANSWER
4 = BUSY/NO ANSWER
5 = EXTERNAL
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to clear previous entry
DISPLAY
ACCOUNT CODE
(001)
ACCOUNT CODE
(005) _
ACCOUNT CODE
(005) 1234