Samsung DCS Manual page 14

3.6 PROGRAM OUTSIDE LINE NAMES
This program is used to add or replace a 11-character name or identification for each outside line. You
may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1 Press TRSF 404
Display shows
2. Dial the station (eg. : 704) OR use the
UP and DOWN keys to select a
trunk and press the RIGHT
soft key to move the cursor
3. Enter the station name using the
procedure described above
and press the RIGHT soft key to return
to step 2
4. Press TRSF to store and exit
programming OR press SPEAKER to
store and advance to the next program
Page 5
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
_
[704] TRUNK NAME
SAMSUNG