Samsung DCS Manual page 39

3.32 PROGRAM ALARM SENSOR NAME
Allows the System Administrator to assign a name to an alarm sensor. Names are written using the
using the procedure in 3.5 PROGRAM STATION NAMES.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next program
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case
ACTION
1. Press TRSF 213
Display shows
2. Dial ALARM number ( eg., 3502) OR
press UP or DOWN key to make
selection and press RIGHT soft key to
move cursor
3. Enter in name using above method and
table press RIGHT soft key to return to
step 2
4. Press TRSF to store and exit OR
press SPEAKER to store and advance to
next program
Note: This program is not applicable to DCS Compact and DCS 24 Systems.
Page 30
DISPLAY
[3501] ALARM NAME
[3502] ALARM NAME
_
[3502] ALARM NAME
FIRE!