Samsung DCS Manual page 18

PROGRAM KEYS
UP & DOWN - Selects a station.
KEYPAD - Used to enter number.
HOLD - Press to clear entry.
A - Does not have a function.
B - Inserts a FLASH.
C - Inserts a PAUSE.
D - Changes the dialling type from pulse to tone.
E - Hides and displays digits.
F - Toggles program between Station speed dial numbers and names
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF 105
Display shows
2. Dial the station number (eg. 205) OR
press UP or DOWN keys to select the
station and press the RIGHT soft key to
move the cursor OR press the LEFT
soft key to go to step 4
3. If the selected station has no speed dial
bins, this display will be shown and a new
station may be selected
4. Dial the location number (eg, 05) OR
press UP or DOWN to select a location
and press the RIGHT soft key to move
the cursor OR press the LEFT soft key to
return to step 2
5. Enter the line access code (eg. 0)
followed by the number to be stored
(eg. 4264100) OR press the RIGHT soft
key to return to step 2 OR press the
Left soft key to return to step 3 OR press
HOLD to clear an entry (if you make an
error, use the DOWN key to step back)
6. Press the F key to access program
System Speed Dial Names OR press
TRSF to store and exit programming OR
press SPEAKER to save and advance
to the next program
Page 9
DISPLAY
[205] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05 : 0-4264100_