System Access Codes - Samsung DCS Manual

The DCS telephone system has the following preset (default) feature access codes. These codes can be
used if a key is not available for the feature you want to use. Standard telephone users must always dial
these codes.
9 Call attendant or system
operator
10 + xxx Retrieve parked calls
11 Put calls on and take calls off
hold
12 + xxx Retrieve call on hold at
another station
13 Door lock release
16 + xxx Make speed dial calls
17 Save number and redial it
18 Recall dial tone for new call
19 Last number redial
2xx Extension numbers
3xx Extension numbers
400 Cancel Do Not Disturb
401 Set Do Not Disturb
41 Set Message No Ring
42 + xxx Cancel message
43 Set/Return messages
44 Busy station/ line callback
45 Busy station camp-on
46 Set up a conference
47 Enter an account code
48 Set programmed station
message
49 Send a flash to an outside line
500 Station hunt group
to
529 Station hunt group
53+grp+0 Out of group
53+grp+1 In group
54+zone Meet me page
55 + 0 Page all internal zones
Page 48

SYSTEM ACCESS CODES

55 + 1 Page Internal zone 1
55 + 2 Page Internal zone 2
55 + 3 Page Internal zone 3
55 + 4 Page Internal zone 4
55 + 5 Page external zone 1
55 + 6 Page external zone 2
55 + 7 Page external zone 3
55 + 8 Page external zone 4
55 + 9 Page all external zones
55 + * All page
56 Meet Me Answer
57 Alarm sensor clear
58 DISA alarm clear
59 Walking Class of Service
600 Cancel Call Forwarding
601 + xxx Set Forward All Calls
602 + xxx Set Forward Busy
603 + xxx Set Forward No Answer
604 + xxx Set Forward Busy/No Answer
605 + xxx Set Forward Follow Me
65 Directed call pick-up
66 Group call pick-up
67 Universal Answer
681 Voice Dialler activate
682 Voice Dialler Record
7xx Individual line numbers
8x Outside line groups
0 Line Group 0