Program Personal Speed Dial Names For Other Stations - Samsung DCS Manual

3.11 PROGRAM PERSONAL SPEED DIAL NAMES FOR OTHER STATIONS

Each individual station user can program his/her own names, but in cases where this is not
practical, this program allows the System Administrator to view or change any station's speed dial
names. The station speed dial codes are 00 - 19. Each station begins with 20 numbers (00 - 19) and can
be assigned more in blocks of 10 up to a maximum of 50 numbers.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.
ACTION
1. Press TRSF 106
Display shows
2. Dial the station number(eg. 205) OR
press UP or DOWN keys to select the
station and press the RIGHT soft key to
the cursor
3. If the selected station has no speed dial
bins, this display will be shown and a new
station may be selected
4. Dial the speed dial bin location(eg. 05)
OR use the UP or DOWN keys to scroll
through the bin locations and use the
RIGHT soft key to move the cursor OR
press the LEFT soft key to return to step
2
5. Enter the name using the procedure in
3.5 Program Station Names and press the
RIGHT soft key to return to step 2 OR
press the LEFT soft key to return to step
3
6. Press the F key to access program
Personal Speed Dial Numbers for Other
Stations OR press TRSF to store and
exit programming OR press SPEAKER to
store and advance to the next program
Page 10
DISPLAY
[201] SPEED NAME
00 :
[205] SPEED NAME
00 :
[205] SPEED NAME
SPDBLK NOT EXIST
[205] SPEED NAME
05 :_
[205] SPEED NAME
05 : SAM SMITH