Setting Up the Base Receiver
1. Mount the receiver on a tripod with a tribrach, tribrach
adapter, and prism spacer, as shown in the picture on
the right.
2. Position the base system (from step 1) over a known
point.
3. Level the tripod and measure the height of the receiver
from the ground using the tape measure. See
"Measuring Antenna Height" on page 53.
4. Connect the external radio antenna to the antenna
port for RTK setup.
5. Press the power button to turn on the receiver. The
integrated wireless device in the receiver turns on
when the receiver is powered.
6. Connect the receiver to the Bluetooth‐enabled data
collector, running Topcon Field software, to configure
and start the base HiPer V receiver.
7. View the LED display panel for the receiver's current
status. See also "Display Panel Operations" on page 18.
Setting Up the Base Receiver
P/N: 1001608‐01
51