About The Oaf - Topcon HiPer V Operator's Manual

6. Reset the receiver again to return it to its original factory settings.
7. Use the Topcon Receiver Utiility (TRU) to ensure the firmware was uploaded successfully. See "Loading New
Firmware" on page 37.

About the OAF

Topcon issues an Option Authorization File (OAF) to enable the specific options that you purchased. Topcon's OAF system allows
you to customize and configure the receiver according to your particular needs, therefore purchasing only the options you
require.
The HiPer V receiver typically ships with an OAF as per initial purchase of the receiver kit configuration. There are several upgrade
options available with the receiver that can extend the receiver's functionality to better suit your job requirement. Examples of
upgrade options are listed below:
•
GPS + GLONASS dual frequency static operation
•
Radio‐based RTK operation
•
Network RTK operation
•
RTK and update rate up to 20 Hz (10 Hz standard)
Contact your Topcon dealer or a representative for a complete listing of available options and pricing information.
Loading New Firmware
P/N: 1001608‐01 41