Honda 2006 Accord Owner's Manual page 533

05/10/03 20:34:55 32SEA630_533
Fuses
Checking and Replacing Fuses
If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on page
533 to 540 , or the diagram on the
fuse box lid, which fuse or fuses
control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
not the cause. Replace any blown
fuses and check the component's
operation.
530
Taking Care of the Unexpected
1. Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2. Remove the cover from the fuse
box.
FUSE BLOWN
Check each of the large fuses in
3.
the under-bonnet fuse box by
looking through the side window
at the wire inside. Removing these
fuses requires a Phillips-head
screwdriver.