Replacing Engine Coolant - Honda 2006 Accord Owner's Manual

05/10/03 20:22:28 32SEA630_438

Replacing Engine Coolant

The cooling system should be
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
genuine Honda All Season
Antifreeze/Coolant Type 2.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled technician.
1. Open the bonnet. Make sure the
engine and radiator are cool to the
touch.
Turn the ignition switch to the ON
(II) position. Make sure the DUAL
indicator is off. Turn the driver's
side temperature control dial to
'' ''. Turn off the ignition
and remove the key.
EXPANSION
TANK CAP
2. Remove the expansion tank cap.
Cooling System (Diesel models)
O-RING
BLEEDER
PLUG
3. Remove the bleeder plug on the
expansion tank by using the
ratchet.
Maintenance
CONTINUED
435