5-Speed Manual Transmission - Honda 2006 Accord Owner's Manual

05/10/03 20:23:31 32SEA630_446

5-speed Manual Transmission

BOLT
2.0 engine model
Check the fluid level with the
transmission at normal operating
temperature and the car sitting on
level ground.
To check the transmission fluid level,
remove the bolt, then pull down the
left part of the under cover.
FILLER BOLT
Correct level
Remove the transmission filler bolt
and carefully feel inside the bolt hole
with your finger. The fluid level
should be up to the edge of the bolt
hole. If it is not, add genuine Honda
Manual Transmission Fluid (MTF)
until it starts to run out of the hole.
Reinstall the filler bolt securely.
Tighten it to:
39 49 N·m (4 5 kgf·m , 29 36
lbf·ft)
Transmission Fluid
Put the under cover back in place.
If genuine Honda MTF is not
available, you may use an API
service SJ or higher grade motor oil
with a viscosity of SAE 10W-30 or
10W-40 as a temporary replacement.
However, motor oil does not contain
the proper additives and continued
use can cause stiffer shifting.
Replace as soon as it is convenient.
The transmission should be drained
and refilled with new fluid according
to the time and distance recommen-
dations in the maintenance schedule.
If you are not sure how to check and
add fluid, contact your dealer.
CONTINUED
Maintenance
443