Honda 2006 Accord Owner's Manual page 485

05/10/03 20:28:56 32SEA630_485
Lights
5. Remove the socket by turning it
one-quarter turn anticlockwise.
6. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
7. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
8. Turn on the lights to make sure
the new bulb is working.
482
Maintenance
9. Reinstall the boot lid trim. Make
sure it is installed under the edge
of the boot lid seal.
10. Put each trim clip in the hole on
the boot lid trim and push on the
centre until it locks (the centre is
flush with the head).
Side Turn Signal Light
Each side turn signal light is
installed in each outside mirror. It
should be replaced by your dealer.