Honda 2006 Accord Owner's Manual page 263

05/10/03 19:59:32 32SEA630_263
Audio System (C, D Type)
4. When the CD load indicator turns
green and ''LOAD'' appears in the
display, insert the next disc into
the CD slot.
5. Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, the system will begin
playing the last CD loaded.
If you stop loading CDs before all six
positions are filled, and you do not
press the LOAD button, the system
will wait for ten seconds, then stop
the load operation and begin playing
the last CD loaded.
260
Comfort and Convenience Features
To load a single CD:
1. Press and release the LOAD
button.
2. The disc number for an empty
position starts to blink and the
green CD load indicator comes on.
When you see ''LOAD'' in the
display, insert the disc into the CD
slot. Insert it only about halfway;
the drive will pull it in the rest of
the way.
3. The system will load the CD, and
begin playing it.
If you press the LOAD button while
a CD is playing, the system will stop
playing that CD and start the loading
sequence. It will then play the CD
just loaded.
You can also load a CD into an empty
position while a CD is playing by
pressing the appropriate side of a
preset bar. Select an empty position
(the disc number indicator is off),
and press the left or right side of the
preset bar for that position (1 to 6).
The system will stop playing the
current CD and start the loading
sequence. It will then play the CD
just loaded.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.