Honda 2006 Accord Owner's Manual page 203

05/10/03 19:52:37 32SEA630_203
Audio System (A Type)
The band and frequency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ''ST'' will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available.
You can use any of four methods to
find radio stations on the selected
band: TUNE, SEEK, AUTO SELECT,
and the preset bars.
200
Comfort and Convenience Features
Use the TUNE bar to tune
TUNE
the radio to a desired frequency.
Press the side of the bar to tune
to a higher frequency, and the
side to tune to a lower
frequency. The frequency numbers
will start to change rapidly. Release
the bar when the display reaches the
desired frequency. To change the
frequency in small increments, press
and release the TUNE bar quickly.
SEEK The SEEK function
searches the band for a station with
a strong signal. To activate it, press
the SEEK bar on either the
, then release it. Depending on
which side you press, the system
scans upward or downward from the
current frequency. It stops when it
finds a station with a strong signal.
You can store the
Preset
frequencies of your favourite radio
stations in the three preset bars.
Each side of the bars (1
store one frequency on each AM
band (LW, MW), and two
frequencies on the FM band.
To store a frequency:
1. Select the desired band, AM (LW),
AM(MW) or FM. FM1 and FM2
let you store two frequencies with
each preset bar.
2. Use the TUNE or SEEK function
or to tune the radio to a desired
station.
3. Pick the preset number (1
you want for that station. Press
the left or right side of the bar and
hold it until you hear a beep.
6) will
6)