05/10/03 19:58:02 32SEA630_250
Once a station's frequency is stored,
simply press and release the left or
right side of the proper preset bar to
tune to it.
The preset frequencies will be lost if
your car's battery goes dead, is
disconnected, or the radio fuse is
If you are
travelling far from home and can no
longer receive the stations you
preset, you can use the AUTO
SELECT feature to find stations in
the local area.
To activate Auto Select, press the
A. SEL button. A. SEL will flash in
the display, and the system will go
into scan mode for several seconds.
It automatically scans FM band,
looking for stations with strong
signals. It stores the frequencies of
twelve FM stations in the preset bars
6). You can then use the preset
bars to select those stations.
Audio System (C, D Type)
If you are in a remote area, Auto
Select may not find twelve strong
FM stations. If this happens, you will
see a ''0'' displayed when you press
the left or right side of any preset
bar that does not have a station
If you do not like the stations AUTO
SELECT has stored, you can store
other frequencies in the preset bars.
Use the TUNE, SEEK, or SCAN
function to find the desired
frequencies, then store them in the
selected preset bars as described
Auto Select does not erase the
frequencies that you set previously.
When you return home, turn off
Auto Select by pressing the A. SEL
button. The preset bars will then
select the frequencies you originally
Comfort and Convenience Features