Saving Messenger Access Data - Siemens Gigaset C470 IP User Manual

Saving messenger access data

Saving messenger access data
The messenger client in your base station enables instant messaging (immediate mes-
sage transfer, chatting). The phone supports the XMPP messenger (Jabber).
In order for you to use your phone's messenger to "go online" and "chat" on the Internet,
the access data of a messenger server must be saved on your phone.
Your phone is already registered with the Gigaset.net Jabber server. An account has been
assigned to your phone. You can chat to other Gigaset.net subscribers via this account. To
do this you need to create a buddy list on the PC (see "Setting up Gigaset.net Jabber
account" on page 138).
You can also register with another instant messaging provider that supports XMPP Messen-
ger (Jabber). You must then save the messenger server address and your access data on
your phone.
You can define a
Resource
logged in (online) with the messenger server with several devices (phone, desktop PC and
laptop) at the same time using the same Jabber
The Resource name is used to distinguish between these devices. The phone cannot log in
with the messenger server if it does not have a resource name.
You should assign a
ID. The determines which of the devices receives the message.
Priority
Example: You are online using one of your phone's handsets and your PC both at the same
time. You have assigned your phone
(Resource name "PC") Priority 10. In this case, any message addressed to your Jabber ID will
be sent to your phone.
¤
Open the following Web page:
¤
In the
Messenger Account
server or another provider's messenger server (Other).
The access data for
ber ID, Authentication password
the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (max. 50 characters) and password (max. 20 characters) that you used
to register with the messenger server in the
If you have selected
your Gigaset.net account.
¤
In the Jabber server
with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the
field. The default port is 5222.
port
If you have selected
¤
Enter a resource name (max. 20 characters) in the
The default is: phone.
name and a
Priority
Priority as each message will only be sent to one device for each Jabber
(Resource
Settings
field, select whether you wish to use the
Gigaset.net is already stored in the base station. It is displayed in
and
Jabber
Messenger Account =
field, enter the IP address or the DNS name of the messenger server
Messenger Account =
Messenger Account = Gigaset.net,
Web configurator – configuring the telephone via a PC
for your phone. Both are required if you are
ID.
name "phone")
¢ ¢
Messaging Messenger.
server. With this data you can also register with
Jabber ID and Authentication password
Gigaset.net, the fields are preconfigured with
Gigaset.net, the field is preconfigured with the
the port number is preconfigured.
Resource
Priority 5 and your PC
Jabber
Gigaset.net
Jabber server
field.
Jab-
fields.
137