Saving Messenger Access Data - Siemens Gigaset S450 IP User Manual

Saving messenger access data

The messenger client in your base station
enables instant messaging (immediate
message transfer, chatting). The phone
supports the XMPP messenger (Jabber).
In order for you to use your phone's mes-
senger to "go online" and "chat" on the
Internet, the access data of a messenger
server must be saved on your phone.
Your phone is already registered with the
Gigaset.net Jabber server. An account has
already been assigned to the phone. You
can chat to other Gigaset.net subscribers
via this account. You must also create a
buddy list on your PC (see "Setting up a
Gigaset.net Jabber-Account" on page 98).
You can also register with another instant
messaging provider that supports XMPP
Messenger (Jabber). You must then save
the messenger server address and your
access data on your phone.
You can define a
Resource
for your phone. Both are required if
Priority
you are logged in (online) with the mes-
senger server with several devices (phone,
desktop PC and notebook) at the same
time using the same
The name is used to distinguish
Resource
between these devices. The phone cannot
log in with the messenger server if it does
not have a resource name.
You should assign a Priority, as each mes-
sage will only be sent to one device for
each Jabber ID. The
which of the devices receives the mes-
sage.
Example: You are online using one of your
phone's handsets and your PC both at the
same time. You have assigned your phone
(Resource-name "phone") the
your PC (resource name "PC") the priority
10. In this case, any message addressed to
your Jabber ID will be sent to your phone.
¤
Open the following Web page:
¢
Settings Messaging
name and a
Jabber ID.
Priority determines
Priority 5 and
¢
Messenger.
¤
In the
Messenger Account
whether you wish to use the
Jabber server or another provider's
messenger server (Other).
The access data for
already stored in the base station. They
are displayed in Jabber
password and Jabber
data you can also register with the
Gigaset.net Jabber server through your
PC.
¤
Enter the user ID (max. 50 characters)
and password (max. 20 characters) that
you used to register with the messen-
ger server in the
fields. If you have
cation password
selected
Messenger Account = Gigaset.net,
the fields are preconfigured with your
Gigaset.net account.
¤
In the
Jabber server
address or the DNS name of the mes-
senger server with which you are regis-
tered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
Gigaset.net, the field is preconfigured
with the name of the Gigaset.net
server.
¤
Enter the number of the communica-
tion port on the Jabber server in the
Jabber server port
is 5222.
If you have selected
the port number is precon-
Gigaset.net,
figured.
¤
Enter a resource name (max. 20 char-
acters) in the
Resource
The default is: phone.
¤
Enter the priority for your phone in the
field Priority. Select a number between
128 (highest priority) and 127 (lowest
priority) for the priority.
The default is: 5
¤
Click on the Set button.
Web configurator
field, select
Gigaset.net
are
Gigaset.net
ID, Authentication
server. With this
Jabber ID and Authenti-
field, enter the IP
Messenger Account =
field. The default port
Messenger Account =
field.
97