Setting The Default Connection; Updating The Base Station Firmware - Siemens Gigaset C470 IP User Manual

Setting the default connection

Setting the default connection
You can make settings according to whether you want to make calls via VoIP or the fixed
line network by default.
Please note:
The standard connection is only relevant when dialling numbers that are not subject to dialling plans
(page 133) and are entered without a line suffix (page 31).
¢ ¢
v Ð
Settings
VoIP / Fixed Line
Select and press
When making calls:
¤
Press the talk key c briefly if you want to make the call via the default connection.
¤
Press and hold the talk key c if you want to make the call via the other connection
type.

Updating the base station firmware

If necessary, you can update your base station firmware.
The firmware update is downloaded directly from the Internet by default. The relevant Web
page is preconfigured in your phone.
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed line network or VoIP.
u
There is no internal connection between the registered handsets.
u
No other handset has opened the base station menu.
Starting the firmware update manually
¢ ¢
v Ð
Settings
Software Update
Select and press
~
Enter the system PIN and press
The base station establishes a connection to the Internet or to the local PC.
Press the display key to start the firmware update.
§Yes§
Please note:
– The firmware update can last up to 3 minutes.
– When updating from the Internet, checks are made to ensure that no newer version of the
firmware exists. If this is not the case, the operation is terminated and a message is issued to that
effect.
¢
Telephony Default Line
‰
( = on).
§OK§
Base
.
§OK§
.
§OK§
Base station settings
103