Connecting the base to the PABX
Connecting the base to
the PABX
The following settings are only necessary
if your PABX requires them; see the PABX
user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
•
Dialling modes and recall
The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Dial pulsing (DP)
Ï
¢
¢
v
Telephony
s
Select dialling mode and press
Ø
(
§Select§
Setting recall
Your phone is preset at the factory for
operation on the main connection.
For operation on a PABX, you may have
to change this value. Please refer to the
user guide for your PABX.
Ï
¢
¢
v
Telephony
s
Select recall and press
Ø
(
= set value).
Possible values are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
400 ms, 600 ms, 800 ms.
68
Ø
.
¢
Dialling Mode
= selected).
¢
Recall
§Select§
•
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
Ï
¢
¢
v
Telephony
~
Enter or change access code,
max. 3 digits.
Press the display key.
§Save§
If an access code has been saved:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
calls list or answering machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/shortcut
numbers and SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
An existing access code is deleted
using Ñ.
¢
Access Code