Configuring The Network Mailbox For Fast Access - Siemens Gigaset C470 IP User Manual

Using the network mailbox

Configuring the network mailbox for fast access

You can use fast access to make direct calls to a network mailbox.
Assigning key 1 of the handset, changing assignments
The setting for fast access is handset-specific. You can assign a different answer machine
to key on each registered handset.
No answer machine is preconfigured for fast access in the default settings.
Fast access is not yet set on the handset: Press and hold the key .
Or:
¢ ¢
v Ð
Settings
The list of connections (VoIP and fixed line network) that are assigned to the handset as
receive numbers is displayed. The display shows
relevant default name for the connection
s
Select connection and press
If a number is already saved to the base station for the selected network mailbox, fast
access is activated.
a
Press and hold (idle status).
If no number has been saved for the network mailbox a message is displayed to this effect.
You will be prompted to enter the number for the network mailbox.
s
Jump to the
~
Enter the number for the network mailbox.
Press the display key.
§Save§
a
Press and hold (idle status).
Fast access is automatically activated.
Please note:
You can only assign fast access to one answer machine.
However, you can also call the network mailbox assigned to a handset's receive numbers directly via
the message key (page 85).
Calling the network mailbox
Press and hold.
If you have set a network mailbox for fast access you will be connected straight to this net-
work mailbox.
d
If necessary, press the hands-free key.
You will hear the answer machine announcement.
84
¢
Voice Mail Set Key 1
§OK§
line.
Number
Configuring the network mailbox for fast access
Net AM: xxx, where xxx is replaced by the
(IP1 to IP6, ).
Fxd. line
‰
( = on).